Oil for Manual Tube Bender Pivots
Selection inputs for lubricating pivots and pins on manual tube benders to reduce wear and sticking.
This page lists neutral selection inputs. Confirm equipment manufacturer specifications before selecting a lubricant.
Operating Conditions
| Operating Parameter | Typical Range/Value |
|---|---|
| Mechanism | Steel pins/pivots under high intermittent load |
| Environment | Metal chips and shop dust |
| Application | Drip oil or light spray |
| Maintenance | Regular wipe-down and re-oil |
Required Lubricant Properties
| Required Property | Specification |
|---|---|
| Boundary Lubrication | Protect under high contact pressure |
| Corrosion Protection | Prevent rust on pins and bores |
| Cleanability | Should not gum up with debris |
| Penetration | Reach pin/bore interfaces |
Availability
As an Amazon Associate, LubeConsultant earns from qualifying purchases. Full disclosure.
Sources
- General lubrication practice
Last updated: