Oil for Hydraulic Jacks and Bottle Jacks
Selection inputs for hydraulic jack fluid, focused on seal compatibility and low-temperature performance.
This page lists neutral selection inputs. Confirm equipment manufacturer specifications before selecting a lubricant.
Operating Conditions
| Operating Parameter | Typical Range/Value |
|---|---|
| Temperature | Often used in unheated garages; cold starts possible |
| System Type | Small manual pump; low flow |
| Maintenance | Infrequent service; fluid may sit for long periods |
Required Lubricant Properties
| Required Property | Specification |
|---|---|
| Seal Compatibility | Compatible with common jack seals; avoid unsuitable ATF unless specified |
| Low-Temp Flow | Flows in cold conditions; resists aeration |
| Corrosion Protection | Protects internal steel surfaces |
Availability
As an Amazon Associate, LubeConsultant earns from qualifying purchases. Full disclosure.
Sources
- Jack manufacturer recommendations (overview)
- Hydraulic fluid properties (overview)
Last updated: