Grease for U-Joints and Driveshafts
Selection inputs for chassis grease used in U-joints/driveshaft fittings, focusing on EP performance and water resistance.
This page lists neutral selection inputs. Confirm equipment manufacturer specifications before selecting a lubricant.
Operating Conditions
| Operating Parameter | Typical Range/Value |
|---|---|
| Load | Shock loads possible |
| Environment | Road splash, water, and dirt exposure |
| Service | Regular greasing intervals common (if fittings present) |
| Temperature | Moderate; near exhaust can be warmer |
Required Lubricant Properties
| Required Property | Specification |
|---|---|
| EP/AW Performance | Required for shock loading |
| Water Resistance | Preferred |
| Mechanical Stability | Maintain consistency under shear |
| Compatibility | Avoid mixing incompatible thickeners where possible |
Availability
As an Amazon Associate, LubeConsultant earns from qualifying purchases. Full disclosure.
Sources
- Manufacturer documentation
- Published lubrication guides (general)
Last updated: