Grease for Open Gears
Lubricant selection inputs for open gear drives, focusing on adhesion, EP performance, and contamination resistance.
This page lists neutral selection inputs. Confirm equipment manufacturer specifications before selecting a lubricant.
Operating Conditions
| Operating Parameter | Typical Range/Value |
|---|---|
| Exposure | Often exposed to dust and debris; wash-off possible |
| Load | High contact stresses; shock loading possible |
| Speed | Application-dependent; may be slow to moderate |
| Relubrication | Manual or automatic; interval depends on environment |
Required Lubricant Properties
| Required Property | Specification |
|---|---|
| EP Additives | Required for high-load applications |
| Tackiness/Adhesion | High; resist fling-off and wash-off |
| Base Oil Viscosity | Typically higher viscosity for slow/heavy-load gears (verify OEM guidance) |
| Corrosion Protection | Required in outdoor/wet exposure |
Availability
As an Amazon Associate, LubeConsultant earns from qualifying purchases. Full disclosure.
Sources
- Manufacturer documentation
- Published lubrication guides (general)
Last updated: