Grease for Bench Vise Lead Screws
Selection inputs for greases used on bench vise lead screws and nuts, focused on wear reduction, corrosion resistance, and stick-slip control.
This page lists neutral selection inputs. Confirm equipment manufacturer specifications before selecting a lubricant.
Operating Conditions
| Operating Parameter | Typical Range/Value |
|---|---|
| Load | High clamp forces and sliding contact |
| Contamination | Metal filings, dust, shop debris likely |
| Environment | Indoor shop; possible humidity and light corrosion |
| Service Interval | Periodic reapplication after cleaning |
Required Lubricant Properties
| Required Property | Specification |
|---|---|
| EP/Anti-wear | Preferred for sliding threads under load |
| Tackiness | Should adhere and resist fling-off |
| Corrosion Protection | Helps prevent rust on screw surfaces |
| Contamination Tolerance | Should tolerate debris; clean/reapply as needed |
Availability
As an Amazon Associate, LubeConsultant earns from qualifying purchases. Full disclosure.
Sources
- Manufacturer documentation
Last updated: